Ruijie RG-S29 Series

Command Reference RIPng Commands
Commands
show ipv6 rip
Displays the parameters and each statistical
information of the RIPng process.
Platform
Description
N/A
4.13 show ipv6 rip database
Use this command to display the RIPng route entries.
show ipv6 rip database
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
mode
Privileged EXEC mode or user mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show ipv6 rip database
Codes: R - RIPng,C - Connected,S - Static,O - OSPF,B - BGP
sub-codes:n - normal,s - static,d - default,r - redistribute,
i - interface, a/s - aggregated/suppressed
S(r) 2001:db8:1::/64, metric 1, tag 0
Loopback 0/::
S(r) 2001:db8:2::/64, metric 1, tag 0
Loopback 0/::
C(r) 2001:db8:3::/64, metric 1, tag 0
VLAN 1/::
S(r) 2001:db8:4::/64, metric 1, tag 0
Null 0/::
C(i) 2001:db8:5::/64, metric 1, tag 0
Loopback 1/::
S(r) 2001:db8:6::/64, metric 1, tag 0
Null 0/::
The S29 series switch does not support BGP. The configuration example is only for reference.
Related
Commands
Command
Description