Ruijie RG-S29 Series User Manual

Command Reference ARP Commands
scheme, it should be used together with the GSN scheme.
Configuration
Examples
The following example enables the trusted ARP function in global configuration mode.
Ruijie(config)# service trustedarp
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.17 show arp
Use this command to display the Address Resolution Protocol (ARP) cache table
show arp [ interface-type interface-number | trusted [ip [mask]] | [ip [mask] | mac-address | static |
complete | incomplete ] ]
Parameter
Description
Parameter
Description
interface-type
interface-number
Displays the ARP entry of a specified Layer-2 or Layer-3 port.
trusted
Displays the trusted ARP entries. Currently, only the global VRF
supports the trusted ARP.
ip
Displays the ARP entry of the specified IP address. If trusted is
configured, only trusted ARP entries are displayed. Otherwise, untrusted
ARP entries are displayed.
mask
Displays the ARP entries of the network segment included within the
mask. If trusted is configured, only trusted ARP entries are displayed.
Otherwise, untrusted ARP entries are displayed.
static
Displays all the static ARP entries.
complete
Displays all the resolved dynamic ARP entries.
incomplete
Displays all the unresolved dynamic ARP entries.
mac-address
Displays the ARP entry with the specified mac address.
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the output result of the show arp command:
Ruijie# show arp
Total Numbers of Arp: 7

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English