Ruijie RG-S29 Series User Manual

Command Reference RMON Commands
trap community
(Optional) Trap event. When a trap event is triggered, the system sends
trap with the group named “community”.
description
description-string
(Optional) Description of the event. The value is a character string
consisting of 1 to 127 characters.
owner
owner-name
(Optional) Owner of an entry. The value is a character string consisting of 1
to 63 characters that are case sensitive.
Default
N/A.
Command mode
Global configuration mode.
Usage guidelines
The RGOS allows you to modify the configured history information of the Ethernet network,
including variable, absolute/delta, owner, rising-threshold/falling-threshold, and the
corresponding events. However, the modification does not take effect immediately until the
system triggers the monitoring event at the next time.
Examples
The example below defines the event actions: log event and send trap message.
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#rmon event 1 log trap public description "ifInNUcastPkts
is abnormal" owner UserA
Related
commands
Command
Description
rmon alarm number variable interval {absolute | delta }
rising-threshold value [event-number] falling-threshold
value [event-number] [owner ownername]
Adds an alarm entry.
2.5 show rmon
Default
Use this command to display the RMON configuration.
show rmo
Default
N/A.
Command mode
Privileged EXEC mode.
Usage guidelines
N/A.
Examples
The example below displays the RMON configuration.
Ruijie#show rmon
ether statistic table:
index = 1

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English