Ruijie RG-S29 Series User Manual

Configuration Guide DHCP Snooping Commands
14.2 ip dhcp snooping
Use this command to enable the DHCP Snooping function globally.
Use the no form of this command to restore the default setting.
ip dhcp snooping
no ip dhcp snooping
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
The show ip dhcp snooping command is used to display whether the DHCP Snooping function is
enabled.
Configuration
Examples
The following example enables the DHCP Snooping function.
Ruijie# configure terminal
Ruijie(config)# ip dhcp snooping
Ruijie(config)# end
Related
Commands
Command
Description
show ip dhcp snooping
Displays the configuration information of DHCP
Snooping.
ip dhcp snooping vlan
Configures DHCP Snooping enabled VLAN.
Platform
Description
N/A
14.3 ip dhcp snooping bootp-bind
Use this command to enable DHCP Snooping BOOTP-bind function.
Use the no form of this command to restore the default setting.
ip dhcp snooping bootp-bind
no ip dhcp snooping bootp-bind
Parameter
Description
Parameter
Description
N/A
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English