Ruijie RG-S29 Series

Command Reference Interface Commands
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.26 show interfaces status err-disable
Use this command to display the interface violation status.
show interfaces [ interface-type interface-number ] status err-disable
Parameter
Description
Parameter
Description
interface-type
interface-number
(Optional) The interface type and ID.
Defaults
Command
Mode
Any CLI mode
Usage Guide
If you do not specify an interface, violation status of all interfaces is displayed.
Configuration
Examples
The following example displays the violation status of interface GigabitEthernet 0/1.
Ruijie#show interface gigabitEthernet 0/1 status err-disabled
Interface Status Reason
-------------------------------- ---------------- ----------------
GigabitEthernet 0/1 err-disabled BPDU Guard
The violation status is displayed as err-disabled.
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.27 show interfaces transceiver
Use this command to display transceiver information of the interface.
show interfaces [ interface-type interface-number ] transceiver [ alarm | diagnosis ]