Ruijie RG-S29 Series User Manual

Command Reference OSPFv2 Commands
original one. Only the routes matching the specific type can be redistributed. Use the no form of this
command to restore the default configuration.
When you filter routes for redistribution by following the route-map rule, the match rule of the
route-map rule is specific for the original redistribution parameters. The route-map rule works only
when the redistributed OSPF routes follow the match rule.
The range of set metric is from 0 to 16777214 for the associated route-map. If the value exceeds
the range, introducing a route fails.
The following are the rules for configuring the no form of the redistribute command:1. If the no
form specifies some parameters, restore their default values.2. If the no form contains no
parameter, delete the whole command..
Configuration
Examples
N/A
Related
Commands
Command
Description
summary-address
Configures the aggregate route for the external
route of the OSPF route area.
default-metric
Sets the default metric of the OSPF
redistribution route.
Platform
Description
N/A
2.47 router ospf
Use this command to create the OSPF routing process in global configuration mode. Use the no form
of this command to restore the default setting.
router ospf
no router ospf process-id
Parameter
Description
Parameter
Description
process-id
ID of an OSPF process. If the process ID is not configured, process 1
is configured.
Defaults
No OSPF routing process exists by default.
Command
Mode
Global configuration mode
Usage Guide
Based on the original implementation, the RGOS10.1 adds the routing process ID to multi-instance

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English