Ruijie RG-S29 Series User Manual

Command Reference Line Commands
3.33 terminal databits
Use this command to configure the databit number of the character for the current terminal in flow
communication mode. Use the no form of this command to restore the default setting.
terminal databits bit
terminal no databits
Parameter
Description
Parameter
Description
bit
Configures the databit number of the character, in the range from 5 to
8.
Defaults
The default is 8.
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example sets the databit number of every character for the current terminal in flow
communication mode to 7.
Ruijie#terminal databits 7
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
3.34 terminal escape-character
Use this command to set the escape character for the current terminal. Use the no form of this
command to restore the default setting.
terminal escape-character escape-value
terminal no escape-character
Parameter
Description
Parameter
Description
escape-value
Sets the ASCII value corresponding to the escape character for the
current terminal, in the range from 0 to 255.
Defaults
The default escape character is Ctrl+^ (Ctrl+Shift+6) and the ASCII decimal value is 30.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English