Command Reference QoS Commands
The following example displays all class maps.
Ruijie# show class-map
Class Map cmap1
Match ip dscp 20 40
Class Map cmap2
Match access-group 110
The fields in the output of this command are described in the following table.
Indicates the class map name.
Indicates the matched rule.
2.20 show mls qos interface
Use this command to display the QoS configuration of the interface.
show mls qos interface [ interface-id ] [ policers ]
Displays the traffic policing configured on the interface.
Privileged EXEC mode, global configuration mode, interface configuration mode.
The following example displays the QoS configuration of interface GigabitEthernt 1/3.
Ruijie# show mls qos interface gigabitethernet 1/3
Interface: GigabitEthernet 0/3
To Next Page
Loading...
Need help?
General