Ruijie RG-S29 Series

Command Reference NSM Commands
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Examples
The following example displays the default gateway IPv6 address.
Ruijie# show ipv6 redirects
Default Gateway: 10::1
Field
Description
Default Gateway
IPv6 address of the default gateway
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
5.16 show ipv6 route
Use the command to display the configuration of the IPv6 routing table.
show ipv6 route [[ ipv6-prefix / prefix-length [ longer-prefixes ] | protocol [ process-id ] | weight ] ]
Parameter
Description
Parameter
Description
ipv6-prefix/prefix-length
(Optional) Specifies a prefix for route’s IPv6 address.
longer-prefixes
(Optional) Displays the route with an IPv6 address
prefix mostly matched.
protocol
((Optional) Displays the route information of specific
protocol.
process-id
(Optional) Specifies a route process ID.
weight
(Optional) Displays the non-default-weight routes only.
Defaults
All routes are displayed by default.
Command
Mode
Privileged EXEC mode
Usage Guide
Use this command to display route information.
Examples
N/A
Related
Command
Description