Command Reference Basic Configuration Management Commands
Use this command to set the Message-of-the-Day ( MOTD ) . Use the no form of this command to
remove the setting.
banner [ motd ] c message c
Separator of the MOTD. Delimiters are not allowed in the MOTD.
Global configuration mode
This command sets the MOTD, which is displayed at login. The letters that follow the separator will
be discarded.
The following example configures the MOTD.
Ruijie(config)# banner motd $ hello,world $
2.6 banner prompt-timeout
Use this command to configure the prompt-timeout message to notify timeout. Use the no form of this
command to remove the setting.
banner prompt-timeout c message c
Separator of the message. Delimiters are not allowed in the
To Next Page
Loading...
Need help?
General