Command Reference File System Commands
4.14 show file systems
Use this command to display the file system information.
User EXEC mode/Privileged EXEC mode/Global configuration mode/Interface configuration mode
The following example displays the file system information:
Ruijie#show file systems
Size(KB) Free(KB) Type Flags Prefixes
NA NA ram rw tmp:
NA NA network rw tftp:
NA NA network rw oob_tftp:
NA NA xmodem rw xmodem:
8192 2416 disk rw flash:
1048576 548576 disk rw usb0:
File system space, in the unit of KB.
Available file system space, in the unit of KB.
Permissions on the file system include:
 ro: read-only
 wo: write-only
 rw: read and write
Use this command to display the mounted information.
To Next Page
Loading...
Need help?
General