Command Reference Line Commands
Use this command to enter the specified LINE mode.
line [ aux | console | tty | vty ] first-line [ last-line ]
Auxiliary port, on the routers.
Asynchronous port, on the routers.
Virtual terminal line, applicable for telnet/ssh connection.
Number of first-line to enter
Number of last-line to enter
Global configuration mode
The following example enters the LINE mode from LINE VTY 1 to 3:
Ruijie(config)# line vty 1 3
Use this command to increase the number of VTY connections currently available. Use the no form of
this command to restore the default setting.
To Next Page
Loading...
Need help?
General