Ruijie RG-S29 Series User Manual

Command Reference SNTP Commands
Platform
Description
N/A
4.4 sntp server
Use this command to specify an SNTP server. Use the no form of this command to remove the SNTP
server.
sntp server { ip- address | domain } [ source source-ip-address ]
no sntp server
Parameter
Description
Parameter
Description
ip-address
IP address of the SNTP server.
domain
Specifies the domain name of the SNTP server.
source-ip-address
(Optional) Indicates the specified source IP address.
Defaults
No SNTP server is configured by default.
Command
mode
Global configuration mode.
Usage Guide
As SNTP is fully compatible with NTP, the SNTP server can be used as an NTP server in Internet.
Configuration
Examples
The following example specifies an SNTP server in Internet.
Ruijie(config)# sntp server 192.168.4.12
Related
Commands
Command
Description
show sntp
Displays the SNTP configuration.
sntp enable
Enables SNTP.
Platform
Description
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English