Ruijie RG-S29 Series User Manual

Command Reference RIP Commands
Ruijie(config-router)#
Related
Commands
Command
Description
network (RIP)
Defines the network number of the RIP
process.
Platform
Description
N/A
1.29 show ip rip
Use this command to display the RIP process information.
show ip rip
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode/ Global configuration mode/ Routing process configuration mode
Usage Guide
It is used to display the three timers, routing distribution status, routing re-distribution status, interface
RIP version, RIP interface and network range, metric, and distance of the RIP process quickly.
Configuration
Examples
The following example displays the basic information of the RIP process such as the update time and
management distance.
Ruijie#show ip rip
Routing Protocol is "rip"
Sending updates every 10 seconds, next due in 4 seconds
Invalid after 20 seconds, flushed after 10 seconds
Outgoing update filter list for all interface is: not set
Incoming update filter list for all interface is: not set
Default redistribution metric is 2
Redistributing: connected
Default version control: send version 2, receive version 2
Interface Send Recv
FastEthernet 0/1 2 2
FastEthernet 0/2 2 2
Routing for Networks:
192.168.26.0 255.255.255.0
192.168.64.0 255.255.255.0

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English