Configuration Guide DAI Commands
Use this command to verify whether the interface is a DAI trust interface.
The following example verifies the DAI trust state of all :
Ruijie#show ip arp inspection interface
Interface Trust State
--------------------- -----------
GigabitEthernet 0/1 Untrusted
Default Untrusted
Parameter Description:
17.4 show ip arp inspection vlan
Use this command to verify whether the DAI function on the VLAN is enabled.
show ip arp inspection vlan [ vlan-id | word ]
VLAN ID, ranging from 1 to 4094
String of the VLAN range, such as 1,3-5,7,9-11
Use this command to verify whether the DAI function on the VLAN is enabled.
The following example verifies whether the DAI function on the VLAN is enabled:
Ruijie# show ip arp inspection vlan
Vlan Configuration
---- -------------
To Next Page
Loading...
