Ruijie RG-S29 Series User Manual

Command Reference sFlow Commands
7.5 sflow counter interval
Use this command to configure the sFlow counter sampling interval.
sflow counter interval seconds
Use this command to restore the default sFlow counter sampling interval.
no sflow counter interval
Use this command to restore the default sFlow counter sampling interval.
default sflow counter interval
Parameter
Description
Parameter
Description
seconds
sFlow counter sampling interval. The range is form 3 to 2,147,483,647.
The unit is second.
Defaults
The default sFLow counter sampling interval is 30 seconds.
Command
Mode
Global configuration mode
Default Level
14
Usage Guide
This command is used to configure the global sFlow counter sampling interval, and sFlow Counter
sampling of all interfaces uses this sampling interval.
Configuration
Examples
The following example configures the sFlow counter sampling interval to 60 seconds.
Ruijie(config)# sflow counter interval 60
Verification
Use the show sflow command to display the sFlow counter sampling interval.
Prompt
Messages
N/A
Common
Errors
N/A
Platforms
N/A
7.6 sflow enable
Use this command to enable flow sampling and counter sampling on the interface.
sflow enable [ ingress | egress ]

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English