Ruijie RG-S29 Series

Command Reference Syslog Commands
8.45 terminal monitor
Use this command to show logs on the current VTY window. Use the no form of this command to
restore the default setting.
terminal monitor
terminal no monitor
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
Log information is not allowed to be displayed on the VTY window by default.
Command
Mode
Privileged EXEC mode
Usage Guide
This command only sets the temporary attributes of the current VTY. As the temporary attribute, it is
not stored permanently. At the end of the VTY terminal session, the system will use the default
setting, and the temporary setting is invalid. This command can be also executed on the console, but
it does not take effect.
Configuration
Examples
The following example allows log information to be printed on the current VTY window:
Ruijie# terminal monitor
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
Command
History
Version
Description
N/A
N/A