Ruijie RG-S29 Series User Manual

Command Reference Basic Configuration Management Commands
2 Basic Configuration Management Commands
2.1 <1-99>
Use this command to restore the suspended Telnet Client session.
<1-99>
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
User EXEC mode
Usage Guide
This command is used to restore the suspended Telnet Client session. Hot keys (ctrl+shift+6 x) are
used to exit the Telnet Client session creation. The <1-99> command is used to restore the session. If
the session is created, you can use the show session command to display the session.
Configuration
Examples
The following example restores the suspended Telnet Client session.
Ruijie# 1
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.2 banner exec
Use this command to configure a message to welcome the user entering user EXEC mode through
the line. Use the no form of this command to restore the default setting.
banner exec c message c
no banner exec
Parameter
Description
Parameter
Description
c
Separator of the message. Delimiters are not allowed in the
message.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English