Configuration Guide Web Authentication Commands
5 Web Authentication Commands
5.1 accounting
Use this command to set an accounting method for the template.
Use the no form of this command to restore the default setting.
accounting { method-list }
Template configuration mode
The method-list parameter in this command should be consistent with network accounting list name
configured in AAA.
The following example sets the mlist1 accounting method for the eportalv2 template.
Ruijie(config.tmplt.eportalv2)# accounting mlist1
Use this command to set an authentication method for the template.
Use the no form of this command to restore the default setting.
authentication { method-list }
To Next Page
Loading...
Need help?
General