Ruijie RG-S29 Series

Command Reference Private VLAN Commands
7 Private VLAN Commands
7.1 debug bridge pvlan
Use this command to enable private VLAN debugging. Use the no or default form of this command to
restore the default setting.
debug bridge pvlan
no debug bridge pvlan
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
Debugging is disabled by default.
Command
mode
Privileged EXEC mode
Usage Guide
Debugging information includes error and prompt messages appearing during private VLAN
configuration.
This command can be used to troubleshoot VLAN and interface configuration failure.
With private VLAN debugging enabled, all super VLAN configuration and packet processing on
SVI is displayed.
Debugging information helps troubleshooting and fault location.
Configuration
Examples
The following example enables private VLAN debugging.
Ruijie# debug bridge pvlan
The following example disables private VLAN debugging.
Ruijie# no debug bridge pvlan
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
7.2 private-vlan
Use this command to configure the private VLAN feature. Use the no or default form of this