Command Reference Line Commands
device.
Ruijie#terminal stop-character 26
3.45 terminal terminal-type
Use this command to configure the simulated terminal type string for the current terminal. Use the no
form of this command to restore the default setting.
terminal terminal-type terminal-type-string
terminal no terminal-type
Sets the terminal type string, such as vt100 and ansi.
The following example sets the simulated terminal type string for the current terminal to ansi.
Ruijie#terminal terminal-type ansi
Use this command to set the screen width for the terminal.
terminal width screen-width
To Next Page
Loading...
Need help?
General