Configuration Guide SSH Commands
AAAAAwEA AQAAAEEA 2m6H/J+2 xOMLW5MR 8tOmpW1I XU1QItVN mLdR+G7O
Q10kz+4/
/IgYR0ge 1sZNg32u dFEifZ6D zfLySPqC MTWLfw==
% Key pair was generated at: 7:1:25 UTC Jan 16 2013
Key name: RSA private
Usage: SSH Purpose Key
Key is not exportable.
Key Data:
AAAAAwEA AQAAAEEA 0E5w2H0k v744uTIR yZBd/7AM 8pLItnW3 XH3LhEEi
BbZGZvn3
LEYYfQ9s pgYL0ZQf S0s/GY0X gJOMsc6z i8OAkQ==
crypto key generate { rsa | dsa }
Generates DSA and RSA keys.
Use this command to display the information of the SSH server.
Privileged EXEC mode/Global configuration mode
This command is used to display the information of the SSH server, including version, enablement
state, authentication timeout, and authentication retry times.
Note: If no key is generated for the SSH server, the SSH version is still unavailable even if this SSH
version has been configured.
The following example displays the information of the SSH server.
SSH and SCP disabled:
Ruijie(config)#show ip ssh
SSH Disable - version 1.99
please generate rsa and dsa key to enable SSH
Authentication timeout: 120 secs
Authentication retries: 3
To Next Page
Loading...
Need help?
General