Command Reference IPv6 Commands
Use this command to display the information of the general prefix including the manually configured
and learned from the DHCPv6 agent.
The following example displays the information of the general prefix.Ruijie#
show ipv6 general-prefix
There is 1 general prefix.
IPv6 general prefix my-prefix, acquired via Manual configuration
2001:1111:2222::/48
2001:1111:3333::/48
Configures the general prefix.
Use this command to display the IPv6 interface information.
show ipv6 interface [ interface-id ] [ ra-info ] ] [ brief [ interface-id ] ]
Interface (including Ethernet interface, aggregate port, or SVI)
Displays the RA information of the interface.
Displays the brief information of the interface (interface status and
address information).
Use this command to display the address configuration, ND configuration and other information of an
IPv6 interface.
The following example displays the information of the IPv6 interface.
Ruijie# show ipv6 interface vlan 1
Interface vlan 1 is Up, ifindex: 2001
address(es):
Mac Address: 00:00:00:00:00:01
INET6: fe80::200:ff:fe00:1 , subnet is fe80::/64
Joined group address(es):
To Next Page
Loading...
Need help?
General