Ruijie RG-S29 Series User Manual

Command Reference DHCP Commands
4.49 show dhcp lease
Use this command to display the lease information of the IP address obtained by the DHCP client.
show dhcp lease
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
If the IP address is not defined, display the binding condition of all addresses. If the IP address is
defined, display the binding condition of this IP address.
Configuration
Examples
The following example displays the result of the show dhcp lease.
Ruijie# show dhcp lease
Temp IP addr: 192.168.5.71 for peer on Interface: FastEthernet0/0
Temp sub net mask: 255.255.255.0
DHCP Lease server: 192.168.5.70, state: 3 Bound
DHCP transaction id: 168F
Lease: 600 secs, Renewal: 300 secs, Rebind: 525 secs
Temp default-gateway addr: 192.168.5.1
Next timer fires after: 00:04:29
Retry count: 0 Client-ID: redgaint-00d0.f8fb.5740-Fa0/0
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
4.50 show ip dhcp binding
Use this command to display the binding condition of the DHCP address.
show ip dhcp binding [ ip-address ]
Parameter
Description
Parameter
Description
ip-address
(Optional) Only displays the binding condition of the specified IP addresses.
Defaults
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English