Ruijie RG-S29 Series

Command Reference Voice VLAN Commands
show voice vlan
Display Voice VLAN configurations and the
current state.
Platform
Description
N/A
8.7 voice vlan enable
Use this command to enable the Voice VLAN DSCP value in the interface configuration mode. Use
the no form of this command to restore the default setting.
voice vlan enable
no voice vlan enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
mode
Interface configuration mode
Usage Guide
Use this command to enable the Voice VLAN on the physical port only. The Voice VLAN can be
enabled on the Access Port, Trunk Port, Hybrid Port, Private VLAN host port, Private VLAN
promiscuous port and Uplink port on the Ruijie products.
With the global Voice VLAN disabled, although the Voice VLAN can be enabled on the port, it is
invalid.
Configuration
Examples
The following example enables the Voice VLAN function on the interface FastEthernet 0/1.
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# voice vlan enable
Related
Commands
Command
Description
show voice vlan
Display Voice VLAN configurations and the
current state.
Platform
Description
N/A