Ruijie RG-S29 Series User Manual

Command Reference Line Commands
access-list-name
Specifies the ACL name.
in
Filters the incoming connections.
out
Filters the outgoing connections.
Defaults
N/A
Command
Mode
Line configuration mode
Usage Guide
N/A
Configuration
Examples
The following example uses the ACL named “test” to filter the outgoing IPv6 connections in line VTY 0
4.
Ruijie(config)# line vty 0 4
Ruijie(config-line)ipv6 access-list test out
Related
Commands
Command
Description
show running
Displays status information
Platform
Description
N/A
3.18 length
Use this command to set the screen length for the line. Use the no form of this command to restore
the default setting.
length screen-length
no length
Parameter
Description
Parameter
Description
screen-length
Sets the screen length, in the range from 0 to 512.
Defaults
The default is 24.
Command
Mode
Line configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the screen length to 10.
Ruijie(config-line)# length 10

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English