Ruijie RG-S29 Series

Command Reference OSPFv2 Commands
FastEthernet 0/1 State
State of the network interface; UP means normal working and
Down means faults.
Internet Address
Interface IP address
Area
OSPF area of the interface
MTU
Corresponding MTU
Matching network config
Network area configured for the corresponding OSPF
Process ID
Corresponding process ID
Router ID
OSPF router id
Network Type
OSPF network type
Cost
OSPF interface cost
Transmit Delay is
OSPF interface transmit delay
State
DR/BDR state ID
Priority
Priority of the interface
Designated Router(ID)
DR ID of the interface
DR's Interface address
Address of the DR of the interface
Backup designated
device(ID)
Router ID of the BRD of the interface
BDR's Interface address
Address of the BDR of the interface
Time intervals
configured
Hello, Dead, Wait, and Retransmit intervals of the interface
Hello due in
Time when the previous Hello is sent
Neighbor count
Total number of neighbors
Adjacent neighbor count
Number of Full neighbors
Crypt Sequence Number
The corresponding md5 authentication number of the
interface
Hello received send
Statistics on the Hello packets sent and received
DD received send
Statistics on the DD packets sent and received
LS-Req received send
Statistics on the LS request packets sent and received
LS-Upd received send
Statistics on the LS update packets sent and received
LS-Ack received send
Statistics on the LS response packets sent and received
Discard
Statistics on the discarded OSPF packets
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A