Ruijie RG-S29 Series

Command Reference OSPFv2 Commands
ip-address mask
Statistics of routes which have a specified prefix and mask.
Defaults
N/A
Command
Mode
Privileged mode
Usage Guide
This command displays the OSPF routing information. The count option displays the OSPF routing
statistics.
Configuration
Examples
The following example displays the output of the show ip ospf route command.
OSPF process 1:
Codes: C - connected, D - Discard , O - OSPF,
IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external
type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
E2 100.0.0.0/24 [1/20] via 192.88.88.126, FastEthernet 0/1
C 192.88.88.0/24 [1] is directly connected,FastEthernet 0/1,Area 0.0.0.1
The following table describes the fields in the output of the show ip ospf route command.
Field
Description
codes
Route type and corresponding abbreviation and description
100.0.0.0/24
Route prefix
[1]
Route cost
via
Route next hop and interface
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.56 show ip ospf spf
Use this command to display the routing count in the OSPF area.
show ip ospf [ process-id ] spf
Parameter
Description
Parameter
Description
process-id
OSPF process ID
Defaults
N/A