Ruijie RG-S29 Series User Manual

Command Reference OSPFv2 Commands
Command
Mode
Privileged EXEC mode
Usage Guide
This command displays the routing counts within the latest 30 minutes in the OSPF area and current
routing total counts.
Configuration
Examples
The following example displays the output of the show ip ospf [process-id] spf command:
Ruijie# show ip ospf 1 spf
OSPF process 1:
Area_id 30min_counts Total_counts
0 32 1235
1 6 356
The following table describes the fields in the output of the show ip ospf [process-id] spf command.
Field
Description
Area_id
OSPF area ID
30min_counts
OSPF routing counts within the latest 30 minutes
Total_counts
Total counts of the OSPF routing till now
Related
Commands
Command
Description
show ip ospf
Displays the OSPF summary.
Platform
Description
N/A
2.57 show ip ospf summary-address
Use this command to display the converged route of all redistributed routes.
show ip ospf [process-id] summary-address
Parameter
Description
Parameter
Description
process-id
ID of the OSPF process. All OSPF routing processes will be
displayed if this parameter is not configured.
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
This command is valid only on the NSSA ABR, and displays only the routes with local aggregation
operations.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English