Ruijie RG-S29 Series

Command Reference OSPFv2 Commands
Configuration
Examples
The following example displays the output of the show ip ospf summary-address command:
Ruijie# show ip ospf summary-address
OSPF Process 1, Summary-address:
172.16.0.0/16, Metric 20, Type 2, Tag 0, Match count 3, advertise
Field
Description
Summary Address
IP address to be aggregated
Summary Mask
Mask to be aggregated
Advertise
Whether to advertise the aggregated route
Status
Whether the aggregation range takes effect
Aggregated subnets
Number of external routes included in the aggregation range
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.58 show ip ospf virtual-link
Use this command to display the OSPF virtual link information.
show ip ospf [ process-id ] virtual-link [ ip-address ]
Parameter
Description
Parameter
Description
process-id
ID of the OSPF process. All OSPF routing processes will be
displayed if this parameter is not configured.
ip-address
Associated ID of a virtual link neighbor
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
If no virtual link is configured, the command displays the neighbor status and other related
information. The show ip ospf neighbor command does not display the neighbor of the virtual link.
Configuration
Examples
The following is the output of the show ip ospf virtual-links command:
Ruijie# show ip ospf virtual-links
Virtual Link VLINK0 to device 1.1.1.1 is up
Transit area 0.0.0.1 via interface FastEthernet 0/1