Command Reference Basic Configuration Management Commands
Locked
Password: <password>
Use this command to enable simple login password authentication on the interface if AAA is disabled.
Use the no form of this command to restore the default setting.
Login is disabled for console and enabled for AUX, TTY and VTY by default.
If the AAA security server is inactive, this command enables simple password authentication at login.
The password is configured for a VTY or console interface.
The following example sets a login password authentication on VTY..
Ruijie(config)# no aaa new-model
Ruijie(config)# line vty 0
Ruijie(config-line)# password 0 normatest
Ruijie(config-line)# login
Configures the line login password
To Next Page
Loading...
Need help?
General