Configuration Guide 802.1X Commands
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Use this command to display the request/id packets re-transmission interval.
Use this command to display the request/ id packets re-transmission interval:
Ruijie#show dot1x timeout tx-period
Tx-Period: 30 Seconds
Parameter Description:
Request/id packets re-transmission interval.
Use this command to display the information about 802.1X authentication users based on user IDs.
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Use the show dot1x summary command to display 802.1X authentication summaries. And use this
command to display detailed information of a specific user based on its ID.
The following example displays the information about the 802.1X authentication user according to the
user ID.
Ruijie#show dot1x user id 16777225
User name: ts-user
User id: 16777225
Type: static
To Next Page
Loading...
Need help?
General