Ruijie RG-S29 Series - Page 1053

Configuration Guide 802.1X Commands
Parameter
Description
Parameter
Description
mac-addr
MAC address
Defaults
N/A
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Usage Guide
Use the show dot1x summary command to display 802.1X authentication summaries. And use this
command to display detailed information of a specific user based on its MAC address.
Configuration
Examples
The following example displays the information about the 802.1X authentication user according to the
user’s MAC address.
Ruijie#show dot1x user mac 0023.aeaa.4286
User name: ts-user
User id: 16777225
Type: static
Mac address is 0023.aeaa.4286
Vlan id is 2
Access from port Gi0/5
Time online: 0days 0h 0m17s
User ip address is 192.168.3.21
Max user number on this port is 0
Authorization session time is 1000 seconds
Supplicant is private
Start accounting
Permit proxy user
Permit dial user
IP privilege is 0
user acl-name ts-user_6_0_0 :
Parameter Description:
Parameter
Description
User name
User name
User id
User ID
Type
User type
Mac address
User’s MAC address
Vlan id
User VLAN ID
Access from port
The port that user access from
Time online
User online time
User ip address
User IP address
Max user number on this port
The maximum number of users on the port
Authorization session time
The authorized session time