Ruijie RG-S29 Series

Configuration Guide SCC Commands
Examples
Ruijie#show nac-author-user interface gi 0/1
Port Cur_num Max_num
-------- ------- -------
Gi0/1 0 100
Prompt
Messages
N/A
Platforms
N/A
6.7 station-move permit
Use this command to enable authenticated-user migration.
station-move permit
Use this command to disable authenticated-user migration.
no station-move permit
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
Authenticated-user migration is not permitted by default.
Command
Mode
Global configuration mode
Level
14
Usage Guide
You can enable the authenticated-user migration function to allow the online users to be authenticated
again and get online from different physical locations (different ports or VLANs).
Configuration
Examples
The following examples enables authenticated-user migration.
Ruijie(config)#station-move permit
Verification
Use the show running command to check whether the authenticated-user migration function is
enabled.
Prompt
Messages
N/A
Common
Errors
N/A