Ruijie RG-S29 Series

Configuration Guide CPU Protection Commands
13.3 cpu-protect cpu bandwidth
Use this command to configure the bandwidth for the CPU port. Use the no form of this command to
restore the default setting.
cpu-protect cpu bandwidth bandwidth_value
no cpu-protect cpu bandwidth
Parameter
Description
Parameter
Description
bandwidth_value
An integer number ranges from 0 to 100000 (PPS). Indicates the
bandwidth value of the CPU port.
Defaults
The default CPU port bandwidth varies with products.
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the CPU port bandwidth to 32000pps.
Ruijie# configure terminal
Ruijie(config)# cpu-protect cpu bandwidth 32000
Ruijie#show cpu-protect cpu
%cpu port bandwidth: 32000(pps)
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
13.4 cpu-protect traffic-class bandwidth
Use this command to configure the bandwidth for each priority queue. Use the no form of this
command to restore the default setting.
cpu-protect traffic-class traffic-class-num bandwidth bandwidth_value
no cpu-protect traffic-class traffic-class-num bandwidth
Parameter
Description
Parameter
Description
traffic-class-num
A default integer that varies with products, indicating the queue
priority