Command Reference SYS Commands
Summer time name. It can only be a letter between A and Z or between a
and z, which is not case sensitive. The summer time name contains 3 to 31
characters.
Indicates the start time of the summer time.
Start month. Value range: January, February, March, April, May, June,
July, August, September, October, November, and December. The value is
not case sensitive and you are allowed to enter an incomplete word, for
example, Febr and FebRu.
Start week in the start month. The range is from 1 to 5.
The last week of the specified month.
Day in the start week of the start month. Value range: Sunday, Monday,
Tuesday, Wednesday, Thursday, Friday, and Saturday. The value is not
case sensitive and you are allowed to enter an incomplete word, for
example, Web and WeDne.
Time, in the format of hour : minute.
Indicates the end time of the summer time.
End month. Value range: January, February, March, April, May, June, July,
August, September, October, November, and December. The value is not
case sensitive and you may enter an incomplete word, for example, Febr
and FebRu.
Indicates how much time for the summer time ahead of the standard time
during the effective period of the summer time. By default, the summer time
is one hour ahead of the standard time.
Hours ahead of the standard time. The range is from 0 to 12. You are not
allowed to set it to 00:00.
Minutes ahead of the standard time. The range is from 0 to 59. If
hours-offset has been set to 0, you are not allowed to set minutes-offset to
0.
Global configuration mode
Assume that the time zone name of your living place is ABC and the standard time is 8:15 ahead of UTC,
namely, GMT+08:15. The summer time period starts from the first Saturday in February to the third
Monday in May and the summer time is 01:20 ahead of the standard time. In this case, the summer time is
To Next Page
Loading...
