Command Reference SYS Commands
with 0 CPU usage within 15 minutes.
Ruijie# show processes cpu nonzero
Description of the information displayed in this command:
Total running time of the device, precious to seconds.
Total CPU usage of the control core within the last five seconds, one
minute, and five minutes.
Total CPU usage of the virtual control core within the last five seconds,
one minute, and five minutes.
Task statistics information, including the total number of statistics tasks
and the task status.
CPU watermark value and status of the control core.
The task running statuses are listed below:
Terminated task, but not reclaimed by the system
Description of each task:
Task status. Five statuses in total: R (running), T (stopped), S
(sleeping), D (waiting), and Z (zombie).
The core of the CPU on which the task runs
CPU usage of the task within the last five seconds, one minute, five
minutes, and 15 minutes. The value in the round brackets is the CPU
usage that is not divided by the total number of cores where the task
runs.
Task name.
Only the first 15 characters are displayed. The remaining characters
are truncated.
The following example displays the CPU usage in ascending order of task IDs and only the processes with
non-zero CPU usage within 15 minutes are displayed.
Ruijie #show processes cpu nonzero
The following example displays the CPU usage in descending order within five seconds and the tasks with
zero CPU usage within one second are not displayed.
To Next Page
Loading...
Need help?
General