Command Reference ACL Commands
The following example configures a secure channel on interface GigaEthernet 1/1:
Ruijie(config)# interface GigaEthernet 1/1
Ruijie(config-if-GigabitEthernet 1/1)# security access-group 1
Displays the secure channel configuration.
1.35 security global access-group
Use this command to configure the global secure channel.
security global access-group { id | name }
no security global access-group
Global configuration mode
If a device is configured authentications such as 802.1x or Web authentication, the user cannot
access the external network before passing the authentication. You can use this command to
configure a global secure channel for some users to access the external network without
authentication.
The following example configures a global secure channel.
Ruijie(config)#security global access-group 1
Displays the secure channel configuration..
To Next Page
Loading...
