Ruijie RG-S29 Series

Command Reference ACL Commands
specified, access list configuration on all interfaces is displayed.
Configuration
Examples
Ruijie# show access-group interface GigabitEthernet 0/3
ip access-list extended 101
Applied On interface GigabitEthernet 0/3 in.
Related
Commands
Command
Description
ip access-group
Applies the IP access list to the interface.
mac access-group
Applies the MAC access list to the interface.
expert access-group
Applies the expert access list to the interface.
ipv6 traffic-filter
Applies the IPv6 access list to the interface.
Platform
Description
N/A
1.38 show access-lists
Use this command to display all access lists or the specified access list.
show access-lists [ id | name ] [ summary ]
Parameter
Description
Parameter
Description
id
Access list number
name
Name of the IP access list
summary
Access list summary
Command
mode
Global configuration mode
Usage Guide
Use this command to display the specified access list. If no access list number or name is specified, all
the access lists are displayed.
Configuration
Examples
Ruijie# show access-lists n_acl
ip access-list standard n_acl
Ruijie# show access-lists 102
ip access-list extended 102
Ruijie# show access-lists
ip access-list standard n_acl
ip access-list extended 101
permit icmp host 192.168.1.1 any log (1080 matches)
permit tcp host 1.1.1.1 any established
deny ip any any (80021 matches)