Ruijie RG-S29 Series

Command Reference SYS Commands
Process Name : demo
Vsdid : 0
Process Ppid : 1
State : R(running)
On CPU : 0
Priority : 20
Age Time : 24:06.5
Run Time : 00:01.0
Cpu Usage :
Lass 5 sec 0.3% (0.6%)
Lass 1 min 0.3% (0.6%)
Lass 5 min 0.3% (0.6%)
Lass 15 min 0.3% (0.6%)
Tty : ?
Code Usage: 209.6 KB. If the specified task name is not unique, the system displays the following
message:
Ruijie# show processes cpu detailed demo
duplicate process, choose one by id not name.
name: demo, id: 1089, state: S(sleeping)
name: demo, id: 1091, state: R(running)
process name: monitor_procps, do NOT exist, or NOT only one.
Description of the displayed information:
Field
Description
Process Id
Task ID
Process Name
Task name
Process Ppid
Parent process task ID
State
Task running status
On CPU
CPU where the task is running
Priority
Task priority
Age Time
Duration for the task from self-startup to now
Run Time
Duration for the task from self-startup to being executed
Cpu Usage
CPU usage of the task within the last five seconds, one minute, five
minutes, and 15 minutes.
The value in the round brackets is the CPU usage that is not divided by the
total number of cores where the task runs. For example, the demo task is
running on No.0 core, which is the control core and the system has two
control cores. In this case, the CPU usage is 0.3% (0.6%).
Tty
Tty ID, in the format of "Primary device ID, secondary device ID". If it is
0, the value is ?.
Code Usage
Size occupied by the task code segment