Ruijie RG-S29 Series

Command Reference ACL Commands
Parameter
Description
Parameter
Description
interface-name
Interface name
Defaults
N/A
Command
mode
Privileged EXEC mode
Usage Guide
Use this command to display the access redirection configuration on the interface. If no interface is
specified, the access redirection configuration on all interfaces is displayed.
Configuration
Examples
The following example displays the access redirection configuration on interface GigabitEthernet 0/3.
Ruijie #show redirect interface gigabitEthernet 0/3
acl redirect configuration on interface gigabitEthernet 0/3
redirect destination interface gigabitEthernet 0/3 acl 1 in
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.44 svi router-acls enable
Use this command to enable the SVI filter only for the Layer3 packets. Use the no form of this
command to disable this function.
svi router-acls enable
no svi router-acls enable
Parameter
Description
Parameter
Description
N/A
N/A.
Defaults
The SVI filter takes effect for both Layer2 and Layer3 packets by default.
Command
mode
Global configuration mode
Usage Guide
Use this command to make the SVI filter take effect only for the Layer3 packets,