Command Reference QoS Commands
2.6 mls qos map cos-dscp
Use this command to map the CoS value to the DSCP value. Use the no or default form of this
command to restore the default CoS-DSCP mapping.
mls qos map cos-dscp dscp1...dscp8
default mls qos map cos-dscp
Specifies the DSCP value. The range is from 0 to 63.
By default, the CoS 0, 1, 2, 3, 4, 5, 6, 7 is mapped to the DSCP 0, 8, 16, 24, 32, 40, 48, 56
respectively.
Global configuration mode
Ruijie(config)# mls qo map cos-dscp 8 10 16 18 24 26 32 34
show mls qos maps
cos-dscp
Displays the CoS-DSCP mapping.
Use this command to map the DSCP value to the CoS value. Use the no or default form of this
command to restore the default DSCP-CoS mapping.
mls qos map dscp-cos dscp-list to cos
default mls qos map dscp-cos
DSCP list. The range is from 0 to 63.
CoS value. The range is from 0 to 7.
The default DSCP-CoS mapping is listed below:
To Next Page
Loading...
Need help?
General