Ruijie RG-S29 Series User Manual

Command Reference DLDP Commands
3 DLDP Commands
3.1 clear dldp
Use this command to clear statistics about the times that DLDP is down or up at a specified
monitoring point for renewing statistics.
clear dldp [ interface interface-name [ ip-address ] ]
Parameter
Description
Parameter
Description
interface-name
Name of an Layer 3 interface
ip-address
IP address of a peer device
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
DLDP records statistics about the times that DLDP is down or up. You can use this command to clear
statistics about the times that DLDP is down or up at a specified monitoring point and renew statistics.
If an L3 interface or a device IP address is specified, statistics about the times that DLDP is down or
up on the interface at one or all monitoring points will be cleared. If no L3 interface or IP address is
specified, statistics about the times that DLDP is down or up at all monitoring points on all interfaces
will be cleared.
Configuration
Examples
The following example clears statistics about the times that DLDP is down or up at all monitoring
points on all interfaces.
Ruijie#clear dldp
The following example clears statistics about the times that DLDP is down or up at all monitoring
points on the interface vlan 1.
Ruijie#clear dldp interface vlan 1
The following example clears statistics about the times that DLDP is down or up about the peer
device 10.83.132.1 on the interface vlan 1.
Ruijie# clear dldp interface vlan 1 10.83.132.1
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English