Ruijie RG-S29 Series

Command Reference DLDP Commands
The following example displays DLDP statistics at all monitoring points on all interfaces.
Ruijie#show dldp statistic
Interface Type Ip record-time Up-count Down-count
--------- ------- ----------- ----------- -------- ----------
Vl2 Passive 192.168.6.3 2h34m5s 10 9
Vl4 Passive 192.168.3.3 1d2h3m52s 10 9
The following example displays DLDP statistics at all monitoring points on the Layer 3 interface vlan
2.
Ruijie#show dldp statistic interface vlan 2
Interface Type Ip record-time Up-count Down-count
--------- ------- ----------- ----------- -------- ----------
Vl2 Passive 192.168.6.3 2h34m5s 10 9
Field
Description
record-time
Time length for recording the number of times that DLDP is up or down. The time
is displayed in *y***d**h**m**s format:
y: year
d: day
h: hour
m: minute
s: second
Using the Up-count and Down-count parameters, you can check statistics about
the number of times that DLDP is up or down within this time length.
Up-count
Number of times that DLDP is up at the specific monitoring point
Down-count
Number times that DLDP is down at the specific monitoring point
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A