Total
InReceives: 966043 packets, InOctets: 38641824, InErrors: 38826
OutTransmits: 306079, OutOctets: 7798564
GigabitEthernet 3/0/1
InReceives: 799665 packets, InOctets: 31986600, InErrors: 19657
OutTransmits: 272931, OutOctets: 6675320
GigabitEthernet 3/0/2
InReceives: 0 packets, InOctets: 0, InErrors: 0
OutTransmits: 681, OutOctets: 16344
The following example displays the statistics of VRRP packets on the interface gigabitEthernet 3/0/1.
Ruijie#show vrrp packet statistics gigabitEthernet 3/0/1
GigabitEthernet 3/0/1
InReceives: 799911 packets, InOctets: 31996440, InErrors: 19657
OutTransmits: 273053, OutOctets: 6677760
Use this command to enable the packet accepting function on the IPv6 VRRP virtual router.
Use the no form of this command to disable this function.
The master IPv6 VRRP is not allowed to accept packets whose destination IPv6 address is the IPv6
address of a virtual router. However, the NA and NS packets should be accepted regardless of the
configuration of Accept_Mode. Also, the master IPv6 VRRP virtual router in the owner state will
accept and process any packets whose destination IPv6 address is the IPv6 address of a virtual
router, regardless of the configuration of Accept_Mode.