Ruijie RG-S29 Series

Command Reference VRRP Plus Commands
Related
Commands
Command
Description
vrrp group balance
Enables the VRRP Plus function.
vrrp group load-balancing { host-dependent |
round-robin | weighted }
Sets the load balancing policy of the VRRP
Plus.
show vrrp balance interface type number [ brief ]
Displays the VRRP Plus running status of the
specified interface.
Platform
Description
N/A
5.2 show vrrp balance interface
Use this command to display the actions of the VRRP Plus group on the specified interface.
show vrrp balance interface type number [ brief ]
Parameter
Description
Parameter
Description
interface type number
Specifies the interface type and number.
brief
(Optional) Displays the brief information.
Defaults
N/A
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example displays the actions of the VRRP Plus on FastEthernet 0/0.
Ruijie# show vrrp balance interface FastEthernet 0/0
FastEthernet 0/0 - Group 1
State is BVG
Virtual IP address is 192.168.1.54
Hello time 1 sec, hold time 3 sec
Load balancing: host-dependent
Redirect time 300 sec, forwarder time-out 14400 sec
Weighting 90 (configured 100), thresholds: lower 1, upper 100
Track object 1, state: down, decrement weight: 10
There are 2 forwarders
Forwarder 1 (local)
MAC address:
0000.5e00.0101
Owner ID is 00d0.f822.33ab