Ruijie RG-S29 Series

Command Reference VRRP Plus Commands
show vrrp balance
Displays the VRRP Plus running status.
show vrrp balance interface
Displays the VRRP Plus running status of the
specified interface.
Platform
Description
N/A
5.4 vrrp forwarder preempt
Use this command to enable the forwarding preemption on the VRRP Plus backup group.
Use the no form of this command to disable this function.
vrrp group forwarder preempt
no vrrp group forwarder preempt
Parameter
Description
Parameter
Description
group
VRRP group number. The range is from 1 to 255.
Defaults
By default, forwarding preemption is enabled.
Command
Mode
Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example enables the forwarding preemption function of the VRRP Plus backup group
on the Layer3 interface GigabitEthernet 0/0.
Ruijie#config
Ruijie(config)#interface GigabitEthernet 0/0
Ruijie(config-if-GigabitEthernet 0/0)#vrrp 1 ip 192.168.1.1
Ruijie(config-if-GigabitEthernet 0/0)#vrrp 1 balance
Ruijie(config-if-GigabitEthernet 0/0)#vrrp 1 forwarder preempt
Related
Commands
Command
Description
vrrp group balance
Enables the VRRP Plus function.
show vrrp balance [ brief | group ]
Displays the VRRP Plus running status.
show vrrp balance interface type number [ brief ]
Displays the VRRP Plus running status of the
specified interface.
Platform
Description
N/A