Command Reference HTTP Service Commands
Use the no form of this command to restore the default HTTP port number.
Configures the HTTP port number. The value includes 80, 1025 to
65,535.
The default HTTP port number is 80.
Global configuration mode.
Use this command to configure the HTTP port number.
The following example configures the HTTP port number as 8080:
Ruijie(config)#http port 8080
Use this command to configure the HTTPS port number.
Use the no form of this command to restore the default HTTPS port number.
http secure-port port-number
Configures the HTTPS port number. The value includes 443, 1025 to
65,535.
The default HTTP port number is 443.
Global configuration mode.
Use this command to configure the HTTPS port number.
To Next Page
Loading...
Need help?
General