Ruijie RG-S29 Series

Command Reference VSU Commands
Usage Guide
N/A
Configuration
Examples
The following example displays the load balance configuration of the device in VSU mode.
Ruijie#show switch virtual balance
Aggregate port LFF: enable
Related
Commands
Command
Description
show switch virtual
Displays the domain ID as well as the ID and
role of the device.
Platform
Description
N/A
7.10 show switch virtual config
Use this command to display the VSU configuration of the device in standalone or VSU mode.
show switch virtual config [ switch_id ]
Parameter
Description
Parameter
Description
switch_id
Displays the VSU configuration of the specified
device.
Defaults
N/A
Command Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the VSU configuration of the device in standalone mode.
Ruijie#show switch virtual config
mac: 00d0.f810.3323
!
switch virtual domain 1
!
switch 1
switch 1 priority 200
!
vsl-port
port-member interface GigabitEthernet 0/1
port-member interface GigabitEthernet 0/2
!
switch convert mode standalone
!