Command Reference SNMP Commands
1.16 snmp-server system-shutdown
Use this command to enable the SNMP message reload function. Use the no form of this command
to disable the SNMP message reload function.
snmp-server system-shutdown
no snmp-server system-shutdown
The SNMP message reload function is disabled by default.
Global configuration mode.
Use this command to enable the SNMP message reload function which may enable the system to
send the device reload traps to the NMS before the device is reloaded or rebooted.
The following example enables the SNMP message reload function:
Ruijie(config)# snmp-server system-shutdown
1.17 snmp-server trap-format private
Use this command to configure the SNMP traps with private fields. Use the no form of this command
to restore the default trap format.
snmp-server trap-format private
no snmp-server trap-format private
The private field is not carried in the SNMP trap by default.
To Next Page
Loading...
Need help?
General